H&K P7 M13 9mm Semi Automatic Pistol. 1993 Model Year

Posted by Perry Lewin | Firearms & Hunting, Hand Guns, Used Handguns | Monday 13 December 2010 5:54 pm

SOLD!

Special On Line Price:  $2,000.00

The P7 is a German 9mm semi-automatic pistol designed by Helmut Weldle and produced by Heckler & Koch GmbHOberndorf am Neckar. It was revealed to the public for the first time in 1976 as the PSP (Polizei Selbstlade Pistole—”police self-loading pistol”)

History

The decision to equip West German police with an advanced 9mm service pistol and replace existing 7.65mm-caliber weapons was prompted after the 1972 Munich Olympics Massacre. The new firearm was to meet the following requirements: chamber the 9×19mm Parabellum cartridge, weigh no more than 1,000 g (35 oz), the pistol’s dimensions would not exceed 180 x 130 x 34 mm, it should have a muzzle energy of no less than 500 J and a service life of at least 10,000 rounds. The pistol was also to be fully ambidextrous, safe to carry with a loaded chamber and able to be quickly drawn and ready to fire instantly. As a result of a competitive bid the German police forces selected three different pistols into service: the Swiss SIG-Sauer P225 (designated the P6) and two German designs—the P7 (officially called the PSP) and the Walther P5.

Series production of the P7 started in 1979. Shortly after, the pistol was adopted by the German Federal Police’s counter-terrorism unit (GSG 9) and the German Army’s special forces formations. The P7 was produced primarily by H&K but also under license by the Greek defense firm Hellenic Arms Industry[2] as well as in Mexico by the Departamento de Industria Militar (DIM), as a sidearm for general officers and staff.[3][4] The pistol was also exported to several countries.

Design details

Operating mechanism

A schematic of the P7’s gas-delayed blowback system.

The P7 is a semi-automatic, blowback-operated firearm. It features a unique gas-delayed blowback locking system modeled on the Swiss Pistole 47 W+F (Waffenfabrik Bern) prototype pistol (and ultimately on the Barnitzke system first used in the Volkssturmgewehr 1-5), which used gas pressures from the ignited cartridge and fed them through a small port in the barrel (in front of the chamber) to retard the rearward motion of the slide. This is accomplished by means of a piston contained inside of a cylinder located under the barrel that opposes the rearward motion of the slide until the gas pressure has declined—after the bullet has left the barrel—hence allowing the slide to end its rearward motion, opening the breech and ejecting the empty cartridge case.

The chamber has 18 flutes that aid in the extraction process by allowing combustion gases to flow between the fired case and the chamber walls, preventing the case from “sticking” to the chamber walls. The drawback of this system is that the breech “opens” slightly prematurely to allow the slide to initiate its rearward motion. The high temperature gases cycling through a tube located below the chamber area and above the trigger made the early versions of this pistol uncomfortable to shoot after the content of two magazines were fired due to heating. The advantages of this system are a simpler manufacturing process due to the absence of a locking system and a high mechanical accuracy due to the barrel being fixed in the frame; the barrel does not execute any sort of lateral or vertical movement during the operating cycle as with the prolific Browning cam-action systems used extensively in other locked breech pistols.

Features

The P7’s spring extractor is contained within the slide, while the fixed ejector is a surface on the slide catch.

The pistol has an innovative trigger (with a squeeze cocking lever located at the front of the grip, beneath the trigger guard) and is striker fired. Squeezing the cocking lever with a force of 70 N (15.7 lbf) automatically cocks the firing pin. The weapon is then fired by pressing the single stage trigger rated at approximately 20 N (4.5 lbf). The squeeze cocking lever also acts as the safety and protects against accidental firing as the lever moves forward to its initial position automatically decocking the pistol when the lever is released. This method of operation dispensed the need for a manual safety selector while providing safety for the user carrying the pistol with a chambered round and increased the speed with which the pistol could be deployed and fired. The trigger and firing mechanism’s method of operation (and the unique slide catch) were protected by U.S. Patent 4,132,023, issued on January 2, 1979.

The P7 is fed from a single-stack box magazine with a capacity of 8 rounds, which is held inside the firearm’s frame with a release located at the heel of the grip. After the last round has been fired, the slide will remain open thanks to a slide catch that can be released by pulling the slide further back or pressing the squeeze cocker.

The firearm uses a fixed, polygonal barrel (hexagonal with a 250 mm twist rate) and a fixed notched iron sight with contrast dots that enable shooting in low-level lighting conditions. The pistol is completely ambidextrous and two-handed use is enhanced through the use of a profiled and enlarged trigger guard.

Between 1982–1983 the P7 received several modifications, mainly to address American market demand and shooter preferences. These modifications resulted in the P7M8 model. A new magazine release lever (available on both sides of the frame) was installed just beneath the trigger guard, which forced designers to modify both the pistol’s frame and magazine. The trigger guard was equipped with a synthetic heat shield that protects the shooter from excessive heating and a lanyard attachment loop was added in place of the previous magazine heel release. The firing pin and its bushing were also changed.

Taken w/ credit from Wikipedia.

H&K P7 M13 9mm Pistol

H&K P7 M13 9mm Pistol

H&K P7 M13 9mm Pistol

U.S. American Eagle Silver Bullion Coins

Posted by Perry Lewin | News | Thursday 9 December 2010 11:33 pm

The US Mint started issuing the American Eagle Silver Bullions coins in 1986 and they have appeared annually since then.

Designed as investment tools with their weight and purity guaranteed by the United States Government, demand for the silver coins was extremely high in the previous two years. In 2008, 19,583,500 of the coins were sold, with an astonishing 28,766,500 sold in 2009. Prior to these two years, it was uncommon for sales to reach above 10 million annually.

The United States Mint does not sell bullion eagles directly to the public, but instead to a small group of authorized purchasers who in turn resell them to precious metal providers, investors, dealers and collectors. These coins do not have a mintmark, unlike their numismatic counterparts.

2010 Silver Eagles were released on January 19, 2010. Due to the high demand for the coins, they are distributed by the Mint in an allocated, or rationed process.

American Eagle Silver Bullion Coin Design

2009 American Eagle Silver Bullion Coin, Reverse - Click to Enlarge2009 American Eagle Silver Bullion Coin, Reverse – Click to Enlarge

Obverse design: Adolph A. Weinman’s 1916 “Walking Liberty” half dollar was used as the original design for the silver bullion coin. On it we see Lady Liberty walking while holding an olive branch. Also shown are the inscriptions “LIBERTY,” “IN GOD WE TRUST” and the year.

Reverse design: US Mint Engraver John Mercanti designed the original for the reverse which shows a Heraldic Eagle and shield. In the eagles beak is a scroll containing the words “E PLURIBUS UNIM.” Surrounding the eagle are the inscriptions “UNITED STATES OF AMERICA,” “1 OZ. FINE SILVER” and “ONE DOLLAR.”

Coin Specifications & Information

Mint Facility: West Point
Face Value: $1
Date: 2010
Condition: Bullion
Composition: 99.9% silver
Standard Weight: 31.103 g
Standard Diameter: 40.60 mm
Thickness: 2.98 mm
Edge: Reeded
Authorizing Law: Public Law 99-61
Obverse Designer: Adolph A. Weinman
Reverse Engraver: John Mercanti

Product Availability

Release Date: January 19, 2010
Release Price: Based on the spot price of silver
Order Limits: based on authorized purchasers policy
Sales: See US Mint Sales Figures
Sold Out Date:
Sold Within: Only by Itself
Mint Product Page

1/2CT. T.W. 14k Diamond Front & Back Hoop Earrings

Posted by Perry Lewin | Earrings, Jewelry | Wednesday 8 December 2010 5:05 pm

SOLD!

The lucky woman wearing these earrings will surely command attention to herself from every angle.  Even those behind her will turn to watch this diamond-studded woman glitter with  diamonds. These earrings are as beautiful from the front as from the back.  These 14K white gold (585) diamond  hoops weigh a 1/2ct total weight, containing 36 round diamonds.  No matter how you wear your hair these diamond earrings will grab attention, with a class and elegance normal hoop earrings do not have.

Metal:        14k white gold

Stones:      Natural Round diamonds

Setting:      Bead-Set

Weight:     1/2ct total weight

Special On-Line Price:  $399.95

For more information, call toll free 1-888-877-GEMS (4367)

email us:

Front & Back Diamond Hoop Earrings

Louis XVI Antique Pink Marble Mantle Clock, Circa Late 1800’s

Posted by Perry Lewin | Antiques & Collectibles, Specials | Wednesday 1 December 2010 5:06 pm

Louis XVI Style Marble and Bronze Designed Mantle Clock

19th Century

Included here is a magnificent round dial clock in the French Louis XVI style, crafted from rouge marble and dore bronze, circa 1860. The clock measures 19.5″ tall, 12.75″ length x 5.75″ wide. The movement and the maker is unknown.

Price

$895.00

Condition*

Original key included and the clock is working.

Measurements

height: 19.5 in.
Width:  5.75″ x 12.75″ length

Specifications

Two Keys
Materials/Techniques: Marble and  bronze.
Creator: unknown

Photography
provided by Decatur Jewelry & Pawn

Location
Decatur Jewelry & Pawn (Loc. #1)
985 W. Pershing Rd.
Decatur, IL 62526
USA

Phone: 217-875.6625

E-Mail:  plewin@decaturjewelry.com

Greater Decatur Chamber of CommerceIllinois Pawnbrokers AssociationNational Pawnbrokers AssociationMt. Zion Illinois Chamber of Commerce

© 2010-2012 Decatur Jewelry & Pawn. Decatur, IL. All Rights Reserved.
Design adapted & customized by Kestrel Web Site Design from a WordPress Theme • Powered by WordPress

Webmail